ME-Redlab WLS-IFC Bedienungsanleitung PDF herunterladen (Seite 1)

MEasurement starts with ME.

www.meilhaus.com • [email protected]

USB DAQ lab

Inexpensive, complete 12 bit USB mini DAQ lab RedLab 1008, RedPack

The RedLab 1008 is an inexpensive, complete USB mini DAQ lab

in pocket size. It is the ideal alternative solution for simple DAQ

and control applications with USB for a small budget. And it is

a good solution vor education or experiment.



8 single-ended or 4 differential analog inputs.



12 bit A/D conversion up to 1.2 kS/s, 8 kS/s up to 4000

values.



Input range differential: ±20 V, ±10 V, ±5 V, ±4 V, ±2.5 V,

±2.0 V, ±1.25 V, ±1.0 V, programmable.



2 analog outputs, 10 bit.



32 bit event counter.



24 digital I/O channels, wired to a 37-pin D-sub connector.

Expandable with relays or opto-isolation using the ME-UB

series.



4 additional discrete digital I/O channels with screw terminals.



USB 1.1 compatible.



Size (mm): 157 (L) x 102 (W) x 40 (H).

- - - Software included in package: - - -

TracerDAQ (strip chart recorder and data logger). Universal

Library (programming language support for Windows).

InstaCAL utility (for easy installation, calibration and test).

Driver for LabVIEW. Optional or with RedPack: ProLab-

Expert

1) ProLab-Expert may not support the full sample rate.

- - - Ordering codes RedLab 1008 - - -

Model Description Contents:

RedLab 1008 Complete USB mini DAQ lab. RedLab 1008, USB cable, screw driver, software and instructions for

use on CD. RedPack 1008: ProLab-Expert

RedPack 1008 RedLab 1008 bundled with software ProLab-Expert

- - - Specications - - -

Analog inputs

Channels 8, individually congurable as 8 single-ended or 4

differential channels. Connectors: Screw terminals

Ranges ±20/±10/±5/±4/±2.5/±2.0/±1.25/±1.0 V

Rate Max. 8 kS/s

Resolution 12 bit differential, 11 bit single-ended

Trigger Source programmable external DIO0…DIO3

Analog outputs

Channels 2 voltage outputs: Screw terminals

Ranges 0…5 V

Rate Software controlled 100 S/s (single channel),50 S/s

(dual channel)

Resolution 10 bit

Digital I/O

Discrete I/Os 4, independently programmable as inputs or outputs

(screw terminals), 5 V/TTL. Input, high: 3.0 V min., 15.0 V

absolute max.; input, low: 0.8 V max.; output, no load: V

- 0.4 V min., V

typ; output, 1 mA load: V

- 1.5 V.

Protected with 1.5 kΩ serial resistor.

Port I/Os 24 I/O channels arranged in 4x 8 bit ports, each port

programmable as inputs or outputs (type 82C55). All pins

standard with pull-up to V

via 47 kΩ. Input, high: 2.0 V

min., 5.5 V absolute max.; input low: 0.8 V max., -0.5 V

absolute min.; output high: (I

=-2.5 mA) 3.0 V min.

Counter

Channels 1 channel, event counter. Connector: Screw terminals

Resolution 32 bit

Frequency Input frequency max. 1 MHz

Pulse width High/low 500 ns min.

Voltage Input low: 0 V min., 1.0 V max.;

input high: 4.0 V min., 15.0 V max.

General

Size (mm) ~157 (L) x 102 (W) x 40 (H)

Power supply Via USB

Interface USB 1.1 low-speed; max. 3 m USB cable

Connector Screw terminals, 37-pin D-sub male. USB: Type B

Environmental Storage and operating temperature -40…85°C, 0…90%

rel. humidity, non-condensing

Breakout cable

ME AK-DUB

3x ME-UB series

15-pin/8 channels

Low voltage plug

for supply power

Mini USB D

AQ lab

RedLab 1008

RedLab + Connectivity

ME AK-DUB

ME AB-D15F

ME-UB series

RedLab 1008, RedPack

- - - Accessory - - -

Model Description

ME AK-D37/2 2 m cable. 37-pin D-sub female-male, 1:1 contacted. Connects RedLab 1008 to ME AB-D37F or ME-UB37.

ME AB-D37F Terminal block. 37-pin D-sub female connector to spring terminals.

ME-UB37 Terminal box. 37-pin D-sub female connector to spring terminals. Can be plugged directly to the RedLab.

ME AK-DUB Cable, connects 3 ME-UB boxes to aRedLab 1008: 37-pin D-sub female connector to 3x 15-pin D-sub malle connectors + mini

phone jack for external power supply for the ME-UB boxes.

ME-UB series External expansion boxen, with relays or opto-isolation. For the digital ports. Use in any combination: ME-UB15, ME-UBRE, ME-

UBOI, ME-UBOO. The ME-UB15 can also be replaced by a terminal block ME AB-D15F.

MW17-GS/6 12 V/500 mA power supply/mains adaptor for ME-UBRE, ME-UBOO, ME-UBOI.

ME AB-D15F Terminal block. 15-pin D-sub female connector to spring terminals. Can be used instead of ME-UB15, for digital ports.

ProLab-Expert Graphic software. Available as an optional accessory or included in the bundle RedPack

1 2 3 4 5 6 7

USB DAQ lab 1

Inhaltsverzeichnis

Seite 1 - USB DAQ lab

54MEasurement starts with ME.55www.meilhaus.com • [email protected] DAQ labInexpensive, complete 12 bit USB mini DAQ lab RedLab 1008, RedPackThe

Seite 2

54MEasurement starts with ME.55www.ditecom.com • [email protected] DAQ labComplete all-round pocket size DAQ labs RedLab 1208, 1408, 1608, RedPack

Seite 3

56MEasurement starts with ME.57www.meilhaus.com • [email protected] - - - Software included in package: - - -TracerDAQ (strip chart recorder and dat

Seite 4

56MEasurement starts with ME.57www.ditecom.com • [email protected] measurement with wireless data transmission RedLab WLS SeriesUSB DAQ lab

Seite 5

58MEasurement starts with ME.59www.meilhaus.com • [email protected] DAQ labAnalog output modules with digital I/O and counter RedLab 31xx Series,

Seite 6

58MEasurement starts with ME.59www.ditecom.com • [email protected] - - - Ordering codes and functions RedLab 1224 - - -Model DescriptionRedLab 1224LS

Seite 7

60MEasurement starts with ME.USB Connectors Type A and Type BUSB type Aconnector -at a PC/notebook or hubUSB type Bconnector -at an USB device (eg. ME

Weitere Dokumente für Videokonverter ME-Redlab WLS-IFC

Um das Dokument anzuzeigen ME-Redlab WLS-IFC Bedienungsanleitung

ME-Redlab WLS-IFC Bedienungsanleitung (9 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

ME-Redlab WLS-IFC Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Videokonverter ME-Redlab WLS-IFC herunter. USB DAQ lab Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Videokonverter ME-Redlab WLS-IFC

Kommentare zu diesen Handbüchern

ME-Redlab WLS-IFC Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Videokonverter ME-Redlab WLS-IFC herunter. USB DAQ lab Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Videokonverter ME-Redlab WLS-IFC

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Videokonverter ME-Redlab WLS-IFC